|
Here are just some of the more unique
custom gantries we have manufactured over the years.
The crane above is in a nuclear power plant in the Carolina's. Rated Cap. 6,000 lbs. and is 15' under beam also with a 2' cantilever from the legs at the wall end. (note the adjustable legs)
Animal
rescue, South East Coast of Florida.
One of our 4,000 Lb. Cap. All terrain gantries raising a 3,500 lb. marble angle from a head stone for repair.
Photos Above and below
Another Nuke plant this one in NY state This crane has three main vertical columns indicated by the blue arrows. It had to be able to be broken down in order to be assembled in the confined space shown (By hand I might add). Cap. 8,000 Lb. & 12' 5'' under beam.
3,000
Lb. Ac unit on a hospital roof top NY.
The
gantry C completely hard iodized w/stainless steel
particulate casters for a clean room environment
Ontario, CN.
 
A cell tower company needed a crane that could be place up tight (right photo) so that there batteries then could be placed at 5" from the wall (left photo).
\
This
gantry was made for assembling over a working conveyor
system Ontario, CN.
Used in
a marine repair in Essex, CT.
Nuclear
power plant outside Chicago, IL.
This
gantry attaches to the customer machine for maintenance
and repair Madison, WI.
This
gantry in the lowest position had to roll through a 84"
door assembled. Also with the ability to reach 11'
under the beam in its highest position. With
specific hole assignments in between Albuquerque,
NM.
|
