2,000 lb. cap. SB Small Gantry Crane Model
Built to last, this is EC&MW’s most portable small gantry crane we have in production. We utilized a T Frame style concept for this aluminum gantry crane. Not to mention this is our best priced gantry of all our models. This particular model is only available in a 2,000 lb capacity with a maximum height of 102” under the beam. The 102” height was originally designed for use in standard medical facility rooms with nine foot ceilings. With a 6” I Beam, the top of beam height is now 108” allowing for 1” deviation. The height hole spacing’s were purposely positioned to these spacing’s for a reason. It allowed the user, if needed, to offset one leg on a 5” curb or to offset it for a computer room floor. If you require a different capacity, other than 2000 lb, we can design and build you your own small gantry crane with capacities of as little as 250 pounds max.
Uses: Maintenance of linear accelerators (Cancer Machines), Medical Beds Why: Small, Lightweight, easily fits in service vehicles. Custom Cases can make for easy shipping. 6’ I beam model makes for a one person assembly. Last of all, with is large 2,000 lb capacity it can lift almost anything a maintenance person would need to lift.
While most aluminum gantries on the market only have 30″ of min to max height adjustment this little gantry has a whopping 36 3/8″. That’s a lot for its size. With 16 different height adjustments, the SB model makes this (we believe) the most versatile rolling small gantry crane on the market today. Add a 6″ I-beam and you can see that you can have OAH’s of just under 6′, 7′, 8′ and 9′ this should accommodate most any medical, utility or lab room etc. ceiling heights. Should you have to offset one leg on a curb? In the design we’ve made that possible by setting hole spacing’s at 4 7/8″ for a 5″ curb and 5 7/8″ for a 6″ curb. This does not take into consideration adjusting more than one hole at a time. By adjusting multiple holes, you can achieve 16 height offsets for a total of more than 40 combinations. Now the best part, the upright columns are reversible so there’s no way you can put it together wrong. Its truly a service person’s dream.
SB Models Price List Link: https://www.ecmw.com/gantry-pricing/
All of these models adjust from both the top and bottom of the vertical columns. All of our gantries have multiple height adjustments.
Standard SB Small Gantry Crane Features 2k:
2,000 lb. cap.
Lightweight 6061 T6 series structural aluminum construction
Adjustable leg widths or fixed
4-position locking polyurethane casters at 90 degrees
Optional SB Small Gantry Crane Features:
Optional caster brakes
Optional casters styles (Steel wheels, V track, Etc.)
Optional custom size I-beam lengths
Optional custom heights upon request
Optional cart assembly available in all models
Optional swirled finish available in all models
Optional hoists, trolleys and custom slings
Overseas shipping is no trouble. We have shipping world wide for 20 years.
Note: Shipping is F.O.B. from Elko, NV 89801
For pricing please contact us by phone 775-778-9112 or fax 866-840-3839 or Sales@ECMW.com
This warranty is the only written or express warranty given by EC&MW, Inc. & Hospital Rigging Supply, Inc.
10 YEAR From the date of purchases:
EC&MW, Inc. & Hospital Rigging Supply, Inc. warrants to the original buyer that this product shall be free from all defects in material or workmanship for a period of 10 years from date of purchase.
This warranty does not apply to any product, which has been subjected to abuse, misuse, negligence, modification, overuse of its rated capacity, use of or storage in unforgiving environmental conditions, accident or normal wear beyond its serviceability of 20,000 hours.
EC&MW, Inc. & Hospital Rigging Supply, Inc. cannot be responsible for any unlawful sale(s) by unlawful dealers and or any other 3rd party resellers. This includes ALL resales by either online or yard auctions. This warranty is not transferable and is valid only for the original buyer and does not include any subsequent resales. In no event shall EC&MW, Inc. & Hospital Rigging Supply, Inc. be liable for any expressed, implied, statutory and or incidental or consequential damages including but not limited to loss of work, loss of income or additional operating expenses. Notice of defect must given in writing within 60 days of receipt of goods. Upon the return (freight prepaid) to our factory. EC&MW, Inc. & Hospital Rigging Supply, Inc. will, if found defective, refund, repair or replace any part or the entire unit, with one of it or like model. Other manufacturer’s warranties will apply and supersede any warranty given by EC&MW, Inc. & Hospital Rigging Supply, Inc. For those warranties and repairs you must contact the individual manufacturer directly. Any alterations or misuse of this product will void all warranties and liabilities. Customer assumes all liability and risks resulting from the use of this product.
This warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
EC&MW cranes are designed in conformance with the following applicable standards (not all are relevant to an individual crane):
General Design Standards:
We meet or exceed general design standards:
- OSHA 1910.179 – OSHA requirements for Overhead and Gantry Cranes
- ANSI B30.17 – Cranes and Monorails (with Underhung Trolley or Bridge)
- ANSI B30.11 – Monorails and Underhung Cranes
- CMAA 74 – Crane standards from Crane Manufacturers Association of America
All EC&MW cranes have a design factor of 15% of the allowable capacity for the weight of the hoist and 25% for impact.
Please note that CMAA 74 references steel design. In the case of our aluminum cranes, the deflection may be greater than CMAA 74 specifies due to the lower modulus of elasticity of aluminum compared to steel.
Aluminum Structure Design Standards:
We meet or exceed aluminum structure design standards:
- Aluminum Design Manual 2010 by The Aluminum Association
- ASTM B221 Aluminum Alloy Extruded Shape and Tube
Steel Structure Design Standards:
We meet or exceed steel structure design standards:
- ASTM A-36 Structural Steel Shapes
- ASTM A-53 Structural Steel Pipes
- ASTM A-500 Structural Steel Tubing
Welding Fabrication Standards:
All welding performed during the fabrication of EC&MW cranes meets the American Welding Society standards:
- AWS D1.2 Structural Aluminum Welding
- AWS D1.1 Structural Steel Welding
- AWS D1.6 Structural Stainless Steel Welding
We meet label design standards:
- ANSI Z535.4 – Safety Labels
- ANSI Z535.6 – Manuals and Instructions
- All aluminum extrusions used in the manufacturing of our aluminum products meets the ASTM International specifications ASTM B308 for 6061T6 Aluminum.