Because we manufacture more models of aluminum gantry cranes than other companies, we would enjoy speaking with you to insure that you are getting the correct gantry model that’s best suited for your lifting needs. Below is our pricing for many of our models. Some models require us for up to date vendors costs before a final quote can be given therefore we have attached low and high pricing ranges. This will give you a general idea of where to begin, according to your budget. After deciding on your preferred model(s), please contact us directly for either a written or verbal quote as well as lead times for your particular model. Phone 775-778-9112 or Email us at sales@ecmw.com
.
Shipping Lead Times
We understand that much of the rigging/moving industry runs on a time critical agenda. We are introducing our shipping lead times to best facilitate our shipping schedule with your required delivery date. Shipping lead times will be updated throughout the day as orders placed. We hope this will further assist you in making the best choice for your gantry needs. Shipping lead times shown below are counted as working business days (not counting day of pick up) and contingent on orders PLACED before noon PST. Depending upon orders placed, lead times can change throughout day. Please note that once the shipment leaves our facility, we cannot control any unforeseen possibilities of late or lost shipments.
A- Frames
This Section Is Under Construction Call for Pricing. 775-778-9112
Link to A Frames product info and specification page:
https://www.ecmw.com/1k-2k-4k-6k-8k-a-frame/
Link to A Frame manuals page:
For 14 foot models call for specifications. None of the below prices for the 14′ HUB models
include the 18′ and 20′ beam lengths but they are available.
Up to 14′ under beam Fixed Leg A Frame models:
Removable Leg A-Frames
This Section Is Under Construction Call for Pricing. 775-778-9112
Link to Removable Leg A Frames product and specifications page:
https://www.ecmw.com/2k-4k-removable-legs-a-frame/
Link to Removable Leg A Frames manuals page:
3,000 lb. cap. prices are available upon request.
Shipping Lead Time
Standard Door Gantry
These gantries are quoted per customer requirements.
Link to Standard Door Gantry product and specifications page:
2PSB Models
This Section Is Under Construction Call for Pricing. 775-778-9112
Link to 2PSB Models product info and specifications:
https://www.ecmw.com/2k-sb-model/
Link to SB Models manuals page:
This Section Is Under Construction Call for Pricing. 775-778-9112
T-Frames
This Section Is Under Construction Call for Pricing. 775-778-9112
Link to T Frame Models product info and specification:
This Section Is Under Construction Call for Pricing. 775-778-9112
Air/Pneumatic Tire Gantries
A-Frame
These gantries are quoted per customer requirements.
Link to A Frame Air/Pneumatic Tire Gantry product and specifications page:
https://www.ecmw.com/a-frame-airpneumatic-tire-gantry-cranes/
Air/Pneumatic Tire Gantries
T-Frames
This Section Is Under Construction Call for Pricing. 775-778-9112
WARRANTY
View Our Warranty
Warranty
This warranty is the only written or express warranty given by EC&MW, Inc. & Hospital Rigging Supply, Inc.
10 YEAR From date of purchases:
EC&MW, Inc. & Hospital Rigging Supply, Inc. warrants to the original buyer that this product shall be free from all defects in material or workmanship for a period of 10 years from date of purchase.
This warranty does not apply to any product, which has been subjected to abuse, misuse, negligence, modification, overuse of its rated capacity, use of or storage in unforgiving environmental conditions, accident or normal wear beyond its serviceability of 20,000 hours.
EC&MW, Inc. & Hospital Rigging Supply, Inc. cannot be responsible for any unlawful sale(s) by unlawful dealers and or any other 3rd party resellers. This includes ALL resales by either online or yard auctions. This warranty is not transferable and is valid only for the original buyer and does not include any subsequent resales. In no event shall EC&MW, Inc. & Hospital Rigging Supply, Inc. be liable for any expressed, implied, statutory and or incidental or consequential damages including but not limited to loss of work, loss of income or additional operating expenses. Notice of defect must given in writing within 60 days of receipt of goods. Upon the return (freight prepaid) to our factory. EC&MW, Inc. & Hospital Rigging Supply, Inc. will, if found defective, refund, repair or replace any part or the entire unit, with one of it or like model. Other manufacturer’s warranties will apply and supersede any warranty given by EC&MW, Inc. & Hospital Rigging Supply, Inc. For those warranties and repairs you must contact the individual manufacturer directly. Any alterations or misuse of this product will void all warranties and liabilities. Customer assumes all liability and risks resulting from the use of this product.
This warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
STANDARDS
View Our Standards
Standards
EC&MW cranes are designed in conformance with the following applicable standards (not all are relevant to an individual crane):
General Design Standards:
We meet or exceed general design standards:
- OSHA 1910.179 – OSHA requirements for Overhead and Gantry Cranes
- ANSI B30.17 – Cranes and Monorails (with Underhung Trolley or Bridge)
- ANSI B30.11 – Monorails and Underhung Cranes
- CMAA 74 – Crane standards from Crane Manufacturers Association of America
All EC&MW cranes have a design factor of 15% of the allowable capacity for the weight of the hoist and 25% for impact.
Please note that CMAA 74 references steel design. In the case of our aluminum cranes, the deflection may be greater than CMAA 74 specifies due to the lower modulus of elasticity of aluminum compared to steel.
Aluminum Structure Design Standards:
We meet or exceed aluminum structure design standards:
- Aluminum Design Manual 2010 by The Aluminum Association
- ASTM B221 Aluminum Alloy Extruded Shape and Tube
Steel Structure Design Standards:
We meet or exceed steel structure design standards:
- ASTM A-36 Structural Steel Shapes
- ASTM A-53 Structural Steel Pipes
- ASTM A-500 Structural Steel Tubing
Welding Fabrication Standards:
All welding performed during the fabrication of EC&MW cranes meets the American Welding Society standards:
- AWS D1.2 Structural Aluminum Welding
- AWS D1.1 Structural Steel Welding
- AWS D1.6 Structural Stainless Steel Welding
Labeling Standards:
We meet label design standards:
- ANSI Z535.4 – Safety Labels
- ANSI Z535.6 – Manuals and Instructions
Material Standards:
- All aluminum extrusions used in the manufacturing of our aluminum products meets the ASTM International specifications ASTM B308 for 6061T6 Aluminum.
